Lantronix SLC 8000 Series User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 409
set usb storage mount
Syntax
set usb storage mount <U1|U2>
Description
Mounts a USB flash drive in the SLC 8000 advanced console manager for use as a storage
device.
The USB flash drive must be formatted with an ext2 or FAT file system before you mount it.
set usb storage unmount
Syntax
set usb storage unmount <U1|U2>
Description
Unmounts a USB flash drive. Enter this command before removing the USB device.
set usb storage rename
Description
Renames a file on a thumb drive.
Syntax
set usb storage rename <U1|U2> file <Filename> newfile <New Filename>
set usb storage copy
Description
Copies a file on a thumb drive.
Syntax
set usb storage copy <U1|U2> file <Filename> newfile <New Filename>
set usb storage delete
Description
Removes a file on a thumb drive.
Syntax
set usb storage delete <U1|U2> file <Current Filename>

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English