1 7
- Uncouple the chipper always on compact, flat and sufficiently bearing
surface only.
- It is not allowed to put any objects or tools on the machine. Never pile
chippers up on each other.
When having uncoupled the chipper, protect the hitch against
impurities, especially sand etc. Before coupling first clean the joint ball
and grease it slightly. Use a supporting jockey wheel for putting the
chipper aside.
Precautions in Design
Precautions in DesignPrecautions in Design
Precautions in Design
This product is equipped with hoods and covers protecting rotary and hot parts
against touching. Protective covers are usually fixed, bolted down on framing.
A hinged hood of the engine
c
ompartment can be locked to prevent
it against unwished access.
To Next Page
Loading...
