2 3
Transport position
Jockey wheel up and locked, turnable part of slewing gear longitudinally
locked over chassis, hinged part of loading chute tilted, discharge duct tilted
and locked against turning, scotch blocks inserted in holders behind wheels
Storage
StorageStorage
Storage
Store the chipper always in a dry shelter to protect it against
weather effects.
- During storage keep the switch key separately.
- Keep the stored machine beyond unauthorised persons reach.
- Before storage clean all parts of the machine. For cleaning you can use
pressure water.
- Clean especially oily spots.
- Exchange all damaged or worn parts. Use always original spare parts. For
spare parts contact your dealer or authorised services.
- Do not apply any grease or similar agents on elastic hydraulic hoses.
- Before putting the machine aside for a longer time change the engine oil
and its filter.
- Discharge the used oil into a special bin. Dispose the used oil always in
accordance with applicable laws and local regulations.
- Remove any spilled oil and clean all oily spots.
- Always put the machine aside on a flat and solid floor and block its wheels
against unwilling motion by means of scotch blocks.
- Do not put any objects or tools on the machine.
- Store the fuel canisters separately.
To Next Page
Loading...
