1 9
Dangerous space of the chipping
wheel is secured by a terminal
switch. To swing the discharge duck
away or to open the upper half of the
chipping wheel guard it is necessary
to unlock the guard and move it in the
arrow direction, see figure. It is not
possible to put the machine into
operation if the guard remains
opened.
A safety pin of the chipping device
rotor serves for rotor blocking at
blades exchange and servicing. The
pin is chained on edge of the
machine. A hole for the pin inserting
is covered with a rubber stopper.
The chipping device is blocked if the
pin is inserted into a bush on the
rotor.
A terminal switch of a hinged part of
the loading chute turns the engine
off if the chute is tilted.
To Next Page
Loading...
