Laski LS 150 D - Page 21

2 1
Safety frame for material loading
MATERIAL LOADING - pulling toward
attendant
- STOP - central position
- REVERSE - back position
Chassis controls
- parking brake
- crank of supporting jockey wheel
Controller of loading speed
Change of loading roll speed.
Speed regulation in range from 0 to 40
m/min
Discharge duct setting
- drawbar for locking of end piece
- discharge duct turning
Controls under ignition box
From left (valid only for LS 150 D)
- lever of V-belts tightening
- speed control of driving engine
- engine run switching
- battery disconnector