Lauda RE 415 G - Page 10

10 / 134 ECO Gold 09/2021
 Use the cooling coil with cooling water only at operating temperatures below 100 °C.
At higher temperatures there is danger of hot vapors forming.
 Have repairs carried out only by specialists.
 Keep to all the service and maintenance intervals ( 8.3.2).
 Take note of all safety instructions on the device and in these operating instructions. .
Applicable to water-cooled devices:
 Secure the return hose of the water cooling in the discharge area in order to prevent the hose sliding off uncontrol-
lably, also during pressure surges.
 Secure the return hose of the water cooling in the discharge area so that it is not possible of hot cooling water to
splash out.
 Avoid kinking or crushing the return hose of the water cooling. Excessive pressure can cause the cooling water
hoses to tear and hot water to escape.
 To avoid damage due to a leak in the cooling water system we recommend the use of a water leakage sensor with
water cut-off.