1.2 General safety
Read through the operating instructions carefully. They contain important information for working with this device. If
you have any queries, please contact our Service Department ( 8.7).
Follow all the directions in these operating instructions. Only in this way is the correct procedure ensured when working
with the device.
Make sure that the device is only operated by instructed specialist personnel.
Never operate the device without heat transfer liquid.
Never operate the device,
if it is damaged,
if it is leaking,
if the mains cable is damaged.
Switch off the device and withdraw the mains plug:
when carrying out service or repair work,
when moving the device,
when installing or removing modules or accessories,
in case of danger.
Do not make technical modifications to the device. Infringements in this respect invalidate the warranty.
Have service and repair work carried out only by specialists.
Follow the safety information in the following sections and read it through carefully.
The devices are not designed for use in medical applications in accordance with DIN EN 60601-1 and IEC 601-1!
Classification in accordance with EMC requirements
Heating thermostat
ECO Gold
Table 1* in accordance
with
DIN EN 61326-1
Emissions Class B
in accordance with CISPR 11
Cooling thermostat
ECO Gold
Table 1* in accordance
with
DIN EN 61326-1
Emissions Class B
in accordance with CISPR 11
* Devices for use in basic electromagnetic environment
To Next Page
Loading...
