124 / 134 ECO Gold 09/2021
Query of the control parameter Tn (181 = OFF).
Query of the control parameter Tv.
Query of the control parameter Td.
Query of the control parameter KpE.
Query of the control parameter TnE (response: XXXX; 9001 = OFF).
Query of the control parameter TvE (response: XXXX; 5 = OFF).
Query of the control parameter TdE (response: XXXX.X).
Query of the max. correcting quantity limit.
Query of the control parameter XpF.
Query of setpoint offset.
Query of the control parameter PropE.
Status of Contact Input 1: 0 = open/ 1 = closed.
Status of Contact Input 2: 0 = open/ 1 = closed.
Status of Contact Input 3: 0 = open/ 1 = closed.
Status of Contact Output 1:
0 = NO contact open/ 1 = NO contact closed.
Status of Contact Output 2:
0 = NO contact open/ 1 = NO contact closed.
Status of Contact Output 3:
0 = NO contact open/ 1 = NO contact closed.
Keypad: 0 = released / 1 = locked.
Control: 0 = int./ 1 = ext. Pt100 / 2 = ext. Analog / 3 = ext. Serial.
Standby operation: 0 = Device ON / 1 = Device OFF.
Keypad remote control unit Command: 0 = released / 1 = locked.
Setpoint offset source: 0 = normal/ 1 = ext. Pt/ 2 = ext. Analog/ 3 = ext. Serial.
Query of the device type (response = "ECO")
Query of the software version number of the control system.
Query of the software version number of the protection system.
Query of the software version number of the Command remote control.
Query of the software version number of the cooling system.
Query of the software version number of the analogue module.
Query of the software version number of the RS 232/485 module.
Query of the software version number of the Ethernet-Modul
Query of the software version number of the EtherCAT-Modul
Query of the software version number of the digital module.
Query of the software version number of the solenoid valve (cooling water).
To Next Page
Loading...
