Launch ScanPad 071 - Locking and Unlocking the Screen

LAUNCH ScanPad 071 User’s Manual — Knowledge of ScanPad 071
12
disable this function, tap “Settings”, and tap “Display” to enter. Unselect the
option “Auto-rotate screen”.
2.9 Lock & unlock the screen
2.9.1 Lock the screen
• When ScanPad 071 is ON, press POWER key once to lock the screen;
• The system will lock the screen automatically after ScanPad 0
71 remains idle
for a long time.
2.9.2 Unlock the screen
Press POWER key to activate the screen, and then drag the lock to “Unlock”
position.
Note: If you define as unlock using the pattern, you have to draw the right target
pattern to unlock it.
2.10 Notice bar
The notice bar is used to display some activities, such as new message, to do
list and running tasks. You can also open the notice bar to view the reminder or
activity notification.
2.10.1 Turn on the notification panel
1. When a new notification icon appears on the status bar, slide the status bar
upw
ards to ope
n it.
2.
In the notification pane
l, tap the desired n
otification item to open it.
2.10.2 Turn off the notification panel
Slide the panel upwards, and then specify the notifications as OFF to turn off it.
2.11 How to set as airplane mode
According to the regulations of some countries or areas, PC device must be
turned off before boarding on the airplane.