Launch ScanPad 071 - Wi-Fi Connectivity; Enabling Wi-Fi Connection; Connecting to a Wi-Fi Network

LAUNCH ScanPad 071 User’s Manual — Others
38
4.2 WLAN
This function enables you to enjoy surfing on the internet and downloading data
from the internet via Wi-Fi.
4.2.1 Set Wi-Fi on
1. Enter main menu screen, choose “Settings” > “Wi-Fi”.
2. When the Wi-Fi switch is slid to ON position, it indicates Wi-Fi has b
een
activated already.
Note: To prolong the battery life, please switch Wi-Fi off when it keeps
unattended.
4.2.2 Connect to Wi-Fi
1. Enter main menu screen, choose “Settings” > “Wi-Fi”.
2. Tap
, and then choose “Scan” from the pop-up option menu. ScanPad
071 will start scanning all available Wi-Fi netwo
rks.
3.
Tap the desired one to connect.
 If the network you chose is open, you can connect to it directly;
 If the selected network is encrypted and secured with WPA, you have to
input the right access password to connect it.
Hints:
 On WLAN setting screen, tap
to add a new Wi-Fi network.
 On WLAN setting screen, tap
, and then choose “Advanced” from the
pop-up option menu to make more Wi-Fi settings.