Launch ScanPad 071 - Viewing Running Applications

LAUNCH ScanPad 071 User’s Manual — Others
49
4.13.2 View the running applications
1. Enter the main menu screen, tap “Settings” > “Apps”.
2. Scroll the screen from right to left to RUNNING tab to open the currently
running applicat
ion list.
3. The following operations can be
done:
•
View
the currently
running applications;
•
Tap any
one to stop it.
4.14 Language & input
1. Enter the main menu screen, tap “Settings” > “Language & input”.
2. Tap “Language” and choose the desired language, the system interface w
ill
switch to the target language.
3. To configure keyboard and input me
thod, check the box before the desired
input method.
4.15 Set date & time
ScanPad 071 is preset to use the network-provided date, time zone and time.
Note: If Automatic date & time is set as Use network-provided time, date, time
and time zone will not be defined.
1.
Enter the main menu screen, t
ap “Settings” > “Date & time”.
2.
Tap “Set date”, scroll the screen to until the desired numbers appear on the
highlight area. Tap “Done” to save y
our setting.
3.
Tap “Select time zone”, choose the desired one from the timezone list.
Scroll the screen to view more.
4.
Tap “Set time” and scroll the screen to adjust the hour and minute. After
setting, tap “Done” to confirm.
5.
Select or deselect “Use 24-hour format” to switch between 12-hour format
and 24-hour format.
6.
Tap “Choose date format” to choose the desired date format from the list.
4.16 View and release the memory of SD card and
ScanPad 071
To view the available memory of ScanPad 071 and SD: enter main menu screen