Launch X-431 IMMO PAD - Getting Started; Registration and Activation

LAUNCH
10
3 Getting Started
3.1 Register & Update
For initial use, the registration is the necessary first procedure to activate the tool.
After the tablet is initialized, tap
Login
on the upper right corner of the screen, the following screen will
appear:
(If you are a new user, follow A to proceed.)
(If you have registered to be a member, go to B to login the system directly.)
(If you have bound a sub-account to this tool, go to C to login the system.)
(In case you forgot password, refer to D to reset a new password.)
A. If you are a new user, tap
New Registration
to enter sign-up page.
In the above figure, fill in the information in each field. After inputting, tap
Register
, the following screen
will appear:
Input the 12-digit Product Serial Number and 8-digit Activation Code (can be obtained from the password
envelope), and then tap
Activate
.