Launch X-431 IMMO PAD - Health Report (Quick Test)

LAUNCH
23
5). Turn the ignition key to ON: Set the ignition switch to on.
6.2.1 Health report (Quick Test)
This function varies from vehicle to vehicle. It enables you to quickly access all the electronic control
units of the vehicle and generate a detailed report about vehicle health.
On the test item selection screen, tap
Health Report
and turn on the ignition switch, the system will start
scanning the ECUs. Once the scanning process is complete, the following screen will appear:
The tested system with fault code appears in red and the system with OK displays in green (normally).
*Note: Diagnostic Trouble Codes or Fault Codes can be used to identify which engine systems or components that
are malfunctioning. Never replace a part based only on the DTC definition. Retrieving and using DTCs for
troubleshooting vehicle operation is only one part of an overall diagnostic strategy. Follow testing procedures (in
vehicle’s service manual), instructions and flowcharts to confirm the locations of the problem.
On-screen Buttons:
Enter:
Tap to enter the diagnostic function selection screen.
(Search):
Highlight certain diagnostic trouble code and tap it to retrieve it in the search engine.
Report:
Tap to save the diagnostic result as a health report.