LAUNCH
11
Tap
OK
to navigate to the update center to update all available software.
After the registration is successfully complete, the wireless communication between the tablet and the
SmartLink C device is automatically established and user has no need to configure it again.
B. If you have registered to be a member, input your name and password, and then tap the
Login
button to enter the main menu screen directly.
*Note: The tablet has an auto-save function. Once the username and password are correctly entered, the system
will automatically store it. After initial setup, it is no longer necessary to input the account information manually
to log in.
C. If you have created a sub-account or bound an existing account to the tool, tap
Technician login
to
login. For more details on sub-accounts, refer to Chapter 9.3.11.
D. If you forgot the password, tap
Retrieve password
and then follow on-screen instructions to set a
new password.
3.2 Home Screen
It mainly includes the following items:
Enable you to perform the anti-theft key matching function, so that the
immobilizer control system on the car identifies and authorizes remote
control keys to normally use the car.
• Read transponder data (including Mercedes Benz infrared smart
key), and generate exclusive keys.
• Read/write on-board EEPROM chip data, and read/write MCU/ECU
chip data.
Enable you to perform key programming operations, including
To Next Page
Loading...
