LAUNCH
29
Tap the value to change it. After modifying all desired items, tap
Save
to save it. All data stream files are
stored in
Other Modules -> User Info -> Sample
.
E. Actuation Test
This option is used to access vehicle-specific subsystem and component tests. Available test vary by
vehicle manufacturer, year, and model.
During the actuation test, the tablet outputs commands to the ECU in order to drive the actuators, and
then determines the integrity of the system or parts by reading the ECU data, or by monitoring the
operation of the actuators, such as switching a injector between two operating states.
6.2.4 ADAS calibration
This function enables users to perform ADAS calibration operations. The ADAS calibration software is
disabled by default. Before using this function, users must activate it using the ADAS Activation Card.
6.3 Remote Diagnose
6.3.1 SmartLink Super Remote Diagnostics
SmartLink is a newly developed powerful service system dedicated to remote vehicle diagnosis and
service. In the SmartLink ecology system, if a technician (SmartLink C) does not have time to puzzle
through a touch vehicle problem, he can seek a trusted second opinion or additional expertise on various
vehicle issues from remote master technicians or repair shops (SmartLink B). SmartLink B enables the
shop owner to greatly increase customer’s retention and boost shop revenue by providing professional
technical assistance service.
It mainly consists of the following parts:
•
SmartLink Service Platform
– It can be accessed from the
SmartLink
module of the diagnostic
tablet. There are two modules available on the link service platform:
Common user
(for SmartLink C)
and
Service provider
(for SmartLink B).
•
SmartLink C (Customer)
- SmartLink Service Subscriber. In the SmartLink system, the SmartLink
C needs to perform the following operations.
1). Launch Service Link Platform: Binds SmartLink C dongles and submits remote repair orders.
2). SmartLink C Dongle: Connects to the vehicle’s DLC port for collecting the vehicle data and sends it
to the remote SmartLink B.
It supports remote diagnostic services for vehicles that meet CAN / CAN FD / J2534 vehicle
diagnostic standards.
To Next Page
Loading...
