LAUNCH
19
5.2 Immobilizer Programming (IMMO PROG)
The X-PROG 3 is required when performing this operation.
It has the following functions:
1). Read transponder data (including Mercedes Benz infrared smart key), and generate exclusive keys.
2). Read/write on-board EEPROM chip data, and read/write MCU/ECU chip data.
For more detailed operations, refer to the User Manual of the X-PROG 3.
5.3 Key Programmer
This module can identify car key chips and generate various types of chip models from super remotes,
read remote control frequency of car keys, and generate remote control devices for different car models
from various types of super remotes.
It needs to work with the specific compatible Key Programmer (sold separately).
Refer to the User Manual of the Key Programmer for detailed operations.
To Next Page
Loading...
