LAUNCH
28
Combine – this option is mostly used in graph merge status for data comparison.
In this case, different
items are marked in different colors.
On-screen Buttons:
Graph(Single):
Tap to view the parameter in waveform graph.
Graph:
Tap to view the parameters in waveform graphs.
Compare Sample
: Tap it to select the sample data stream file, the values you customized and saved in
process of data stream sampling will be imported into the
Standard Range
column for your comparison.
Note: Before executing this function, you have to sample the values of data stream items and save it as a sample
data stream file.
Report:
To save the current data in text format. All reports are saved in
Other Modules -> User Info ->
My Report -> Health Reports
.
Record:
Tap to start recording diagnostic data. Recorded live data can serve as valuable information to
help you in troubleshooting of vehicle problems. All recorded files are stored in
Other Modules -> User
Info -> My Report -> Recorded Data
.
Help:
Tap to view the help information.
Save Sample:
This item enables you to customize the standard range of live data stream items and
save it as sample file. Each time you run the data stream items, you can call out the corresponding
sample data to overwrite the current standard range.
Tap it to start recording the sample data
(Note: Only data stream items with units will be recorded)
. Once
recording is complete, tap to stop it and navigate to the data modification screen.
To Next Page
Loading...
