Launch X-431 IMMO PAD - Page 28

LAUNCH
24
*Note: Diagnostic report is classified into three categories: Pre-Repair report, Post-Repair report and Diagnostic
Scan. To facilitate the comparison of the pre-repair and post-repair reports and get accurate test result, please
make sure you saved the right type of the diagnostic report. To save the report as a common diagnostic report,
select
Diagnostic Scan
.
*Note: By default, the workshop information is blank. You can configure and revise it from Other Modules ->
Settings -> Shop Information. After you configured the information, it will be automatically generated every time
the diagnostic report is saved. All vehicle and workshop information will be appended as a tag on the diagnostic
report, which allows you to easily retrieve the desired report while performing Filter function of Diagnostic
Report.
On the report details screen, tap
Save
to save it. All diagnostic reports are saved in
Other Modules ->
User Info -> My Report -> Health Report
.
Help:
Tap to view the help information of the selected DTC item.
Compare Results:
Tap to select the pre-repair report to compare. By comparison of the pre- and post-
repair reports, you can easily identify which DTCs are cleared and which remain unfixed.