Launch X-431 IMMO PAD - Page 30

LAUNCH
26
*Note: Different vehicle has different diagnostic menus.
A. Version Information
This function is used to read the version information of system mode, vehicle VIN, software and ECU.
B. Read Fault Code
This function displays the detailed information of DTC records retrieved from the vehicle’s control
system.
On the diagnostic function selection screen, tap
Read Fault Code
, the screen will display the diagnostic
result.
On-screen Buttons:
Freeze Frame:
Tap it to view the snapshot of critical parameter values at the time the DTC is set.
Help:
Tap to view the help information.
Code Search:
Tap to search for more information about the current DTC online.
Report:
Tap to save the current data in text format. All reports are saved in
Other Modules -> User Info
-> My Report -> Health Reports
. For details on report operations, please refer to Chapter 9.3.1.
C. Clear Fault Code
This option can erase the codes from the vehicle. Before the operation, please make sure the vehicle’s
ignition key is in the ON position with the engine off.
*Note: After clearing, you should retrieve trouble codes once more or turn ignition on and retrieve codes again. If
there are still some trouble codes in the system, please troubleshoot the code using a factory diagnosis guide, then
clear the code and recheck.