LAUNCH
43
9. Subscription Renewal Card
This item is used to check the status of the subscription renewal card.
10.Renault SGW
This feature is used to check the status and usage history of connection card (for accessing Renault
Serving Gateway).
*Note: User needs to purchase the connection card from the local dealer separately.
11. Profile
Use this item to view and configure personal information.
12. Change Password
This item allows you to modify your login password.
13. Settings
It enables you to make some application settings and view software version information etc.
1). Units of measurement
It is designed to configure the measurement unit. Metric System and English System are available.
2). Shop information
This option lets you define your print information. It mainly includes Workshop, Address, Telephone, Fax
and License Plate.
Once you saved the print information, it will be entered automatically in the “Add Information” box every
time you save the diagnostic report.
3). Printer set
This option is designed to establish a wireless connection between the tablet and the Wi-Fi printer (sold
separately) while performing printing operations.
The App is compatible with the LAUNCH Wi-Fi Printer (sold separately) and System (external printer).
For LAUNCH Wi-Fi printer, refer to the user manual included with the printer to configure it.
For other Wi-Fi printers,
Before printing, make sure the following conditions are met:
• The Wi-Fi printer is powered on and working normally.
• The print service plug-in associated with the printer is already installed on the tablet (Go to Google
Play or use the Browser to download and install it).
Follow the steps below to proceed:
1. Set the default printer as
System
.
2. Go to
Other Modules -> Built-in apps -> Tablet Settings -> WLAN
, set the WLAN switch to Off.
3. On the report details page, tap .
To Next Page
Loading...
