LDARtools phx42 - Cleaning and Equipment Maintenance; phx42 Operating Parameters

UNCONTROLLED IF PRINTED 45
phx42 Manual Change Log
Rev1
3/8/2018
Added to Technical Specifications section
Rev1.2
4/9/2018
Added Uncontrolled If Printed watermark and pump repair procedures
Rev1.3
5/7/2018
Added Flame Arrestor warning
Rev1.4
5/15/2018
Added Changelog, revised power button indicator table and title page
Rev1.5
5/22/2018
Moved changelog, edited pulse pattern, added references to phx42 report
feature, and other miscellaneous changes.
Rev1.6
6/19/2018
Added “the Big Picture”, List of “phx42 skills”, updated power button table,
added “Sleep Mode” and “Power Down” Definition, added “Rapid Blink”
definition to “Power Button Indicators” table, added “Tech Tip” to H
2
Fill section.
Expanded the Charging procedure. Added data to 42App section.
Rev1.7
6/22/2018
Added Scrubber medium replacement procedure, added receiving from shipping
procedure, removed duplicate backpack details, moved probe inspection to the
beginning of the level 1 section. Added Tech Tips to the charging and pump
replacement procedure.
Rev1.8
8/01/2018
Added Best Practice to H
2
fill section. Added Best Practice, Note, Important, Tech
Tip icons. Revised spare parts kit to include spare part numbers per phx42,
increase quantity of sample pumps to 2, and added H
2
fill cover to list. Added
FAQ questions on extension probe and sample pumps. Added 42App error code
table. Added Glow disk Repair Procedures. Changed “glow-disk” to “glow disk.”
Added tubing description to weekly probe integrity check. Added phx42
operating parameters. Grammar and punctuation changes. Added quick
disconnect image. Changed column order for "Power Button" section. Added
missing sections to ToC.
Rev1.9
10/01/2018
Added reference to Docs section of Support Portal. Formatting changes. Added
orientation references to the external parts section. Changed Tech
tip/Note/Important to Tech tip/Reminders. Added FAQs. Revised Receiving
After Shipping. Added instructions on how to take Level 1 test. Revised the
toolkit inventory page. Revised the weekly probe inspection section. Revised the
removal and reinstallation of the enclosure lid. Revised the Scrubber media
section. Added the glow disk repair section. Added the User login information
section.
Rev2.0
01/10/2019
Added Antenna Procedure. Added fill adapter and O-ring maintenance note.
Changed power connection to electrical connection. Added plastic filter collar
procedures. Added note on differences between sample and combustion pumps.
Edited calibration section to include recalibration to zero note. Added note on
Support Portal and Customer login page. Added Firewall whitelist. Added Probe
construction and probe repair sections.
Rev2.01
1/18/2019
Updated Filter Detection section and clarified reignition attempt criteria.
Updated flow rate to .2 - .3 in Technical section. Edited Manual Calibration
procedure. Added FAQ to Pump section.
Rev2.02 AND
2.03
9/19/2020
Updated Filter Detection Section, updated tool kit list, remove probe repair
procedure, updated phxApp name
Rev2.04
11/18/2020
Updated link on cover page. Added pictures (set screw, vent, charging
port/cover) updated pictures with clearer lettering. Added Storage instructions.
Updated self-check process. Added section for filling empty/dead units. Added
Appendix A. Added Index
Rev2.05
2/26/2021
Added Tech tip referring to keeping at least 400psi of H
2
in the unit.
Added Tip referring to ignition attempts. Changed nominal operating temp to
104°. Added Elevation warning to parameters. Added info to the Filter Detection
page. Added 15-minute warm up requirement to “Igniting phx42” section
Removed “More about the phxApp” section