EasyManuals Logo

Leica BLK2FLY User Manual

Leica BLK2FLY
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
10.3 Pre-ight Procedures
Visual inspection of BLK2FLY
Take off and landing zone:
It is recommended for take off and landing zone, to have at least 4 m
clear distance to any potential obstacles
Ensure a safe take off and landing area
Take off and landing zone on grass: The BLK2FLY is able to take off and
land on grass. However, the grass should not be higher than 5 cm above
the ground. This ensures that the rotor and obstacle avoidance operate
correctly.
Environmental and weather conditions:
Ensure the environmental and meteorological conditions are adequate
for BLK2FLY operation
Refer to 6.3.1 Meteorological Conditions for details
Checklist
Check if compass calibration is needed. Refer to 10.4 Compass Calibration
for details
Environmental and weather conditions allow BLK2FLY operation
Check for charged batteries
Ensure a safe take off and landing area
Check airspace information
Ensure fencing is set up and active if required
Ensure Return behaviour is dened as required. Refer to Return beha-
viour screen for details
10.4 Compass Calibration
Be sure to calibrate the compass before the rst ight. After that, calibrate
the compass when the BLK2FLY Live app prompts to do so.
Take-off is prevented and pilot gets an information message (in ight
screen) once compass calibration is required.
When and how to run compass calibration in general
When moving to new sites, a compass calibration is more likely to be
needed
Compass calibration shall be executed in area free of magnetic elds
Keep enough distance to metal structures, metal pipes, on top on con-
crete with rebar or any other place where magnetic interferences likely to
be present
User should not wear watches, or other objects which can distort natural
magnetic eld. UAV should be able to get GNSS position
Apple iPad can create magnetic eld distortions. Ensure the Apple iPad is
at sufcient distance while calibrating.
Follow this procedure to calibrate the compass of the BLK2FLY
1. Tap the hamburger menu icon.
Overview
Overview
Step-by-step
Operation 95

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Leica BLK2FLY and is the answer not in the manual?

Leica BLK2FLY Specifications

General IconGeneral
BrandLeica
ModelBLK2FLY
CategoryScanner
LanguageEnglish

Related product manuals