28
Type of
message
Display
Error code /
Warning message
Description
Error
0001
Device has overheated
Solution: Let the device cool down
0004 Hardware error
0008 Thermocouple is defective
0400 Drive error
Warning and error messages, UNIPLAN 300
When the maintenance interval for the device is reached, the start display will show
"BLOWER" or "DRIVE". The display disappears automatically after 10 seconds. or can be
acknowledged by pressing Confirm key (42). You must take the device to your service
center.
Maintenance of the UNIPLAN 300
To Next Page
Loading...
