Leister UNIPLAN 300 - Device Identification and Contents; Locating Specification Plate Information; Standard Equipment Included in Delivery

6
Example:
The model and serial number are indicated on your device's specification plate (21).
Please write this information on your operating instructions. In the event of any inquiries to our representatives or
authorized Leister Service Centers, please always refer to this information.
Model:..............................................................................................................................................................
Serial no.: .........................................................................................................................................................
UNIPLAN 300
• 1 x UNIPLAN 300
• 1 x Overlap guide (18)
• 1 x Safety instructions
• 1 x Quick guide
• 1 x Main catalog
UNIPLAN 500
• 1 x UNIPLAN 500
• 1 x Carrying handle / guide handle, short (1)
• 2 x Weights:1.25 kg each (15)
• 1 x Overlap guide (18)
• 1 x Material lifting device (19)
• 1 x Lever screw (20)
• 1 x Bracket for guide handle (21)
• 1 x Weight holder base (22)
• 1 x Weight holder extension (23)
• 1 x Nozzle adjustment gauge (24)
• 1 x Brass wire bush (25)
• 1 x Safety instructions
• 1 x Quick guide
• 1 x Main catalog
• 1 x Hem guide (45)
Your UNIPLAN 300 / 500
Specification plate and identification
Scope of delivery (standard equipment in the case)