25
You must find your desired roll and pitch position by manually operating the trim tabs. Once the boat reaches
the desired roll and pitch angles, press and hold the “FAV 1” or “FAV 2” BUTTON until the corresponding
“FAV 1” or “FAV 2” LED INDICATOR flashes five (5) times. Once the “FAV 1” or “FAV 2” LED
INDICATOR stops flashing, the Auto Glide saves the alternative HOME ROLL AND PITCH POSITION and
the boat will begin leveling around that roll and pitch angle.
2. RESETTING “FAV 1” AND “FAV 2” HOME ROLL AND PITCH POSITIONS:
Once a HOME ROLL AND PITCH POSITION has been saved for “FAV 1” and/or “FAV 2”, the positions are
permanently stored in the Auto Glide. You can turn your motor(s) and battery switch(s) off and these
alternative HOME ROLL AND PITCH POSITIONS will continue to be saved in the Auto Glide. However, if you
ever want to change the HOME AND PITCH POSITIONS for either of the “FAV 1” or “FAV 2” AUTOMATIC
SETTINGS, you simply have to go into MANUAL MODE, manually change the roll and pitch positions of the
boat as described earlier in this section, and then press and hold the corresponding “FAV 1” or “FAV 2”
BUTTON until the LED INDICATOR flashes five (5) times.
3. SAVING “HOLD” HOME ROLL AND PITCH POSITIONS:
To Next Page
Loading...
Need help?
General