LENCO Auto Glide User Manual

36
E. REACQUIRED DATA LOSS:
The Auto Glide will remain in LIMP HOME MODE (or blank when the Key Pad loses communication) until either
the lost GPS or engine data is reacquired, the Key Pad regains communication with the Control Box or you turn
“OFF” your motor(s). Once the Auto Glide reacquires the lost data, it will flash a REACQUIRED DATA – SYSTEM
FAILURE WARNING MESSAGE and then default to MANUAL MODE.
Once the Auto Glide defaults back to MANUAL MODE, you can either continue to control the trim tabs manually
or you can select any of the four (4) AUTOMATIC SETTING BUTTONS.

LENCO Auto Glide Specifications

General

Brand	LENCO
Model	Auto Glide
Category	Boating Equipment
Language	English