11
Table 1. System and Event Icons
Icon Function Screen Text Purpose
Fan is running
Displayed whenever the system is heating or cool-
ing.
Function Fan is running
Fan set to ON. Blower fan is always running.
Can enable or disable by going to modes/schedules
from the home screen.
Fan set to Auto. Blower fan following demand oper-
ation. Only comes on for mode operation (cooling
or heating).
Auto can be set by going to modes/schedules from
the home screen.
Fan set to circulate.
Can enable or disable by going to modes/schedules
from the home screen.
Fan duration can be set by going to menu > settings
> fan. Use the adjustment bar tool to set duration.
Function
System Under
Test
Typically occurs when the system has had a power
interruption. The thermostat starts to look for the in-
door and outdoor controls. Sometimes the outdoor
control takes longer to boot up and therefore does
not respond to inquiry by the thermostat. Recycle
power to system may resolve issue.
To Next Page
Loading...
