Lennox iComfort M30 - System Event Icons Summary; Load Shedding and Temperature Icons; Notification and Savings Icons

12
Table 1. System and Event Icons
Icon Function Screen Text Purpose
Function
Load shedding,
wait time 45
min
Load shedding is where the utility company turns o󰀨
you outdoor unit in peak times for a specied period
of time to help spread the electrical system load for
the area. Your system will resume operation in 45
minutes.
Function
Changing set
point range
Temperature is being adjusted. These two symbols
together also indicate the mode of operation. As
displayed here would indicate heat/cool mode (au-
to-changeover).
Function
Turning feels
like on
Indicating the system is transitioning to “feels like”
mode.
2

This notication icon indicates there are more than
two events active in the system.
Function
Schedule
hold until next
period
The schedule hold screen is displayed after
changing the temperatures on the heating or cool-
ing screens while a schedule is running. Preset 1,
2, 4, 8, 24 hours or custom setting (using the Time
Tool) sets and hold the temperature for a preset
or custom time period until the next time period
setting. Cancel schedule hold on Home Screen
cancels the held setting.
Function
Energy savings
1:00 pm - 5:00
pm
For California residents enrolled in a utility compa-
ny energy savings program, this indicates a energy
savings event is scheduled for a specic time range.