Lenovo System x3550 M3 - Page 304

• 816f070c-2011xxxx : Configuration error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]has deasserted. (DIMM 17)
This message is for the use case when an implementation has detected a Memory DIMM configuration
error has deasserted.
May also be shown as 816f070c2011xxxx or 0x816f070c2011xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Memory
SNMP Trap ID
41
CIM Information
Prefix: PLAT ID: 0127
User Response
No action; information only.
• 816f070c-2012xxxx : Configuration error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]has deasserted. (DIMM 18)
This message is for the use case when an implementation has detected a Memory DIMM configuration
error has deasserted.
May also be shown as 816f070c2012xxxx or 0x816f070c2012xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Memory
SNMP Trap ID
41
CIM Information
Prefix: PLAT ID: 0127
User Response
No action; information only.
• 816f070c-2581xxxx : Configuration error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]has deasserted. (All DIMMS)
This message is for the use case when an implementation has detected a Memory DIMM configuration
error has deasserted.
292
System x3550 M3Problem Determination and Service Guide