Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil A Laser de Classe 1
`
Step 8. Touch the static-protective package that contains the new optical drive to any unpainted metal
surface on the server; then, remove the drive from the package and place it on a static-protective
surface.
Step 9. Follow the instructions that come with the drive to set any jumpers or switches.
Step 10. Attach the drive retention clip that you removed from the DVD drive filler panel to the side of the
new DVD drive.
Figure 49. DVD drive retention clip installation
Step 11. Align the DVD drive in the drive bay and slide the DVD drive into the optical drive bay until the DVD
drive clicks into place.
Chapter 5. Removing and replacing components 445
To Next Page
Loading...
