Step 6. Remove the SAS/SATA RAID riser card from the server (see “Removing the SAS/SATA RAID riser-
card assembly” on page 450
).
Figure 56. SAS/SATA RAID riser-card assembly removal
Step 7. Pull the SAS/SATA adapter horizontally out of the connector on the SAS/SATA RAID riser card.
Figure 57. ServeRAID controller removal
Note: If you have installed the optional ServeRAID adapter advanced feature key, remove it and
keep it in future use (see
“Removing an optional ServeRAID adapter advanced feature key” on page
457
).
If you are instructed to return the SAS/SATA adapter, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Chapter 5. Removing and replacing components 453
To Next Page
Loading...
