This message is for the use case where a Management Controller Event Log on a system is cleared by a
user.
May also be shown as 4000001400000000 or 0x4000001400000000
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
none
SNMP Trap ID
CIM Information
Prefix: IMM ID: 0020
User Response
Information only; no action is required.
• 40000015-00000000 : Management Controller [arg1] reset was initiated by user [arg2].
This message is for the use case where a Management Controller reset is initiated by a user.
May also be shown as 4000001500000000 or 0x4000001500000000
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
none
SNMP Trap ID
CIM Information
Prefix: IMM ID: 0021
User Response
Information only; no action is required.
• 40000016-00000000 : ENET[[arg1]] DHCP-HSTN=[arg2], DN=[arg3], IP@=[arg4], SN=[arg5], GW@=
[arg6], DNS1@=[arg7] .
This message is for the use case where a Management Controller IP address and configuration has been
assigned by the DHCP server.
May also be shown as 4000001600000000 or 0x4000001600000000
Severity
Info
Chapter 3. Diagnostics 37
To Next Page
Loading...
