Figure 101. DVD cable installation
The following illustration shows the cable routing for the DVD cable:
Figure 102. DVD cable connection
Step 6. Reinstall the DVD drive (see
“Installing an optional DVD drive” on page 443).
Step 7. Reinstall the fans (see
“Installing a hot-swap fan assembly” on page 461).
Step 8. Replace the cover (see
“Installing the cover” on page 425).
Step 9. Slide the server into the rack.
Step 10. Reconnect the power cord and any cables that you removed.
486
System x3550 M3Problem Determination and Service Guide
To Next Page
Loading...
