Integrated functions and I/O connectors
Integrated functions and I/O connectors
• Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video
controller, and remote keyboard, video, mouse, and remote drive capabilities.
– ThinkEdge SE350 V2 supports Lenovo XClarity Controller 2 (XCC2). For additional information about Lenovo
XClarity Controller 2 (XCC2), refer to
https://pubs.lenovo.com/lxcc-overview/.
• One XCC system management port (1GbE RJ-45) on the front side to connect to a systems-management network.
This RJ-45 connector is dedicated to the Lenovo XClarity Controller functions and runs at 1 GbE speed.
• One USB 2.0 Gen 1 Type-C connector with Lenovo XClarity Controller (XCC) management on the front to connect
to a system-management network.
• Depending on the configuration, the I/O connectors on the front of the server include:
– 10/25GbE I/O module board
– Two USB 3.2 Gen 1 Type-A connectors
– One USB 3.2 Gen 1 Type-C connector (supporting display)
– One USB 2.0 Gen 1 Type-C connector with Lenovo XClarity Controller (XCC) management
– Two 2.5GbE RJ-45 connectors
– Four 10/25GbE SFP28 connectors
Note: The transmission speed of SFP28 connectors could be 10 Gbps or 25 Gbps, depending on the
processor selected. Processors with at least 16 cores support transmission speed of 25 Gbps.
– 1GbE I/O module board
– Two USB 3.2 Gen 1 Type-A connectors
– One USB 3.2 Gen 1 Type-C connector (supporting display)
– One USB 2.0 Gen 1 Type-C connector with Lenovo XClarity Controller (XCC) management
– Two 2.5GbE RJ-45 connectors
– Four 1GbE RJ-45 connectors
Storage controller (software RAID only)
• Software RAID 0, 1, 5, 10
– Intel VROC SATA RAID, formerly known as Intel RSTe
– Intel VROC NVMe RAID
– VROC Intel-SSD-only (also known as Intel VROC standard): supporst Intel NVMe drives only
– VROC Premium: requires a Feature on Demand (FoD) license and supports Intel and non-Intel NVMe drives
System fan
System fan
• Three 40 mm non hot-swappable fans
144 ThinkEdge SE350 V2 Hardware Maintenance Guide
To Next Page
Loading...
