EasyManua.ls Logo

Lenovo ThinkEdge SE350 V2 - Page 153

Lenovo ThinkEdge SE350 V2
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electrical input
Electrical input
The models with DC/DC power module board (Output 12V):
Up to two 300W (230V/115V) external power adapters
Supported external power adapters:
As required by COMMISSION REGULATION (EU) 2019/1782 of 1 October 2019 laying down ecodesign
requirements for external power supplies pursuant to Directive 2009/125/EC of the European Parliament and of the
Council and repealing Commission Regulation (EC) No 278/2009 (ErP Lot7) for the external power supply of the
product.
ThinkEdge 300W 230V/115V External Power Supply
Table 5. ThinkEdge 300W 230V/115V External Power Supply
Information published Value and precision Unit
Manufacturer’s name Lenovo
-
Model identifier ADL300SDC3A
-
Input voltage 100-240 V
Input AC frequency
50-60 Hz
Output voltage
20.0 V
Output current
15.0 A
Output power
300.0 W
Average active efficiency 90.00 %
Efficiency at low load (10 %)
88.07 %
No-load power consumption 0.15 W
Minimal configuration for debugging
Minimal configuration for debugging
One DRAM memory module in slot 1
One external 300W power adapter
One 2280 NVMe M.2 drive in slot 1 on the I/O module board
Three non-hot-swappable system fans
Chapter 3. Problem determination 145

Table of Contents

Other manuals for Lenovo ThinkEdge SE350 V2

Related product manuals