Figure 31. Removal of the air baffle
Attention: For proper cooling and airflow, reinstall the air baffle before you turn on the server.
Operating the server without the air baffle might damage server components.
After this task is completed
• Make sure to install the air baffle back after finishing component replacement (see “Install an air baffle” on
page 34
).
• If you are instructed to return the component, follow all of the packaging instructions and use any
packaging materials for shipping that are supplied to you.
Demo video
https://www.youtube.com/watch?v=BDKGbi4RC8w
Install an air baffle
Follow instructions in this section to install an air baffle.
About this task
To avoid potential danger, make sure to read and follow the safety information.
• S002
34 ThinkEdge SE350 V2 Hardware Maintenance Guide
To Next Page
Loading...
