Lenovo ThinkServer RD230 - Page 88

Table19.SubmenusundertheHardwareHealthConguration(continued)
ItemOptionDescription
H/WHealthFunctionDisabled/[Enabled]
Enableordisablethehardware
monitorfunction.
AutoFANControlDisabled/[Enabled]
IfthisoptionissettoDisabled,the
fanrunsatthefullspeed;ifthisoption
issettoEnabled,thefanspeedis
controlledbythesystemtemperature.
PWMMinimalDutyCycle[60%DutyCycle]/45%DutyCycle
/30%DutyCycle
SelectthePWMMinimalDutyCycle
forthefan:60%-100%,45%-100%,
or30%-100%.
FanFailureLEDIndication
Disabled/[Enabled]
Enableordisablethefanalarm
function.Ifthisoptionissetto
Enabled,amessageaboutfanfailure
willbedisplayedonthePOSTscreen
whentherotationalspeedofeachfan
islessthan800rpm.
HardwareHealthEventMonitoring
ReadOnly
Thesensordatainthisoptionisfor
readonly.Thedetecteddataincludes
thetemperatureandsystemfan
rotationalspeed.
Note:Thesettingsin[]arethedefaultsettingsintheSetupUtilityprogram.
Table20.SubmenusundertheIPMI2.0Conguration
ItemSub-itemOptionDescription
ViewBMCSystemEvent
Log
Viewthesystemeventlog.
ClearBMCSystemEvent
Log
Deletethesystemevent
log.
SetLANCongurationSettheIPaddresssource,
IPaddress,subnetmask,
andgatewayaddress.
SetPEFCongurationPEFSUPPORTDisabled/[Enabled]
EnableordisablethePEF
support.
BMCWatchDogTimer
Action
[Disabled]/ResetSystem/
PowerDown/PowerCycle
DisableorenabletheOS
baseddongle.Ifenabled,
wheneveranyproblems
arisingfromtheoperation
system,suchasthe
systemhalted,thesystem
managementfeaturewill
takeactionsofReset
System,PowerDown,or
PowerCycleattheprompt
ofthedongleTimer.
BMCAlertLEDandBeep[Off]/OnTurnonorturnofftheBMC
alertLEDandbeep.
FWkey
[0000000]
Note:Thesettingsin[]arethedefaultsettingsintheSetupUtilityprogram.
76ThinkServerUserGuide