•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage131.
Removingtheintrusionswitch
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage53.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
Notes:
•Ifyouremovetheintrusionswitch,youwillnotgetthewarningmessagewhenloggingintoyourserver
withthecoverremoved.
•Useanydocumentationthatcomeswiththeintrusionswitchandfollowthoseinstructionsinadditionto
theinstructionsinthistopic.
Toremovetheintrusionswitch,dothefollowing:
1.Removeallexternalmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,
disconnectallpowercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedto
theserver.
2.Prepareyourserver.See“Removingorextendingtheserverfromtherackcabinet”onpage55.
3.Removetheservercover.See“Removingtheservercover”onpage55.
4.Locatetheintrusionswitchanddisconnectthecablefromthesystemboard.
5.Pressthetab1outwardandlifttheintrusionswitchoutofthesocket.
Figure53.Removingtheintrusionswitch
6.Ifyouareinstructedtoreturntheoldintrusionswitch,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
Chapter6.Replacinghardware89
To Next Page
Loading...
