Figure70.Installingahot-swapredundantpowersupply
4.Connectthepowercordtothepowerconnectoronthenewhot-swapredundantpowersupply.Then,
checkthestatusLEDnearthepowerconnector.WhentheLEDislitingreen,itindicatesthatthe
hot-swapredundantpowersupplyisworkingcorrectly.WhentheLEDislitinamber,itindicatesthatthe
hot-swapredundantpowersupplyislikelytofailorhasfailed.Youneedtoreinstallorreplaceit.
Replacingahot-swapredundantpowersupply
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage53.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
Note:Useanydocumentationthatcomeswiththehot-swapredundantpowersupplyandfollowthose
instructionsinadditiontotheinstructionsinthistopic.
Toreplaceahot-swapredundantpowersupply,dothefollowing:
1.Locatethefailinghot-swapredundantpowersupplyintherearofyourserver.Then,disconnectthe
powercordfromthefailinghot-swapredundantpowersupply.
Chapter6.Replacinghardware103
To Next Page
Loading...
