Contents
Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  i
Safety .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . iii
Safety inspection checklist .  .  .  .  .  .  .  .  .  .  . iv
Chapter 1.  Introduction .  .  .  .  .  .  .  .  . 1
Server package contents .  .  .  .  .  .  .  .  .  .  .  .  1
Server form factor .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1
Features.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1
Specifications .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3
Particulate contamination .  .  .  .  .  .  .  .  .  .  8
Management options.  .  .  .  .  .  .  .  .  .  .  .  .  .  9
Chapter 2.  Server components .  .  .  .  13
Front view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
Front panel .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
Side view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19
Rear view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  20
Rear view LEDs .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
System-board components .  .  .  .  .  .  .  .  .  .  25
System-board LED .  .  .  .  .  .  .  .  .  .  .  .  .  26
System-board jumpers and buttons .  .  .  .  .  .  .  26
Drive backplates/backplanes .  .  .  .  .  .  .  .  .  28
Power distribution board .  .  .  .  .  .  .  .  .  .  .  30
RAID adapters .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  32
Server locks .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  33
Internal cable routing.  .  .  .  .  .  .  .  .  .  .  .  .  35
Fan power cable.  .  .  .  .  .  .  .  .  .  .  .  .  35
Front panel .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  36
M.2 adapter .  .  .  .  .  .  .  .  .  .  .  .  .  .  38
Intrusion switch and RAID flash power  
module .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  38
Optical/tape drives.  .  .  .  .  .  .  .  .  .  .  .  39
Fixed power supply .  .  .  .  .  .  .  .  .  .  .  39
Redundant power supplies .  .  .  .  .  .  .  .  41
Simple-swap drives .  .  .  .  .  .  .  .  .  .  .  42
Hot-swap drives.  .  .  .  .  .  .  .  .  .  .  .  .  46
Parts list.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  56
Power cords .  .  .  .  .  .  .  .  .  .  .  .  .  .  60
Chapter 3.  Server hardware setup .  .  61
Server setup checklist .  .  .  .  .  .  .  .  .  .  .  .  61
Installation guidelines .  .  .  .  .  .  .  .  .  .  .  .  61
Safety inspection checklist.  .  .  .  .  .  .  .  .  63
System reliability guidelines .  .  .  .  .  .  .  .  63
Handling static-sensitive devices .  .  .  .  .  .  64
Memory module installation rules and orders .  .  .  64
Install server hardware options .  .  .  .  .  .  .  .  .  66
Remove the server cover .  .  .  .  .  .  .  .  .  66
Remove the front door .  .  .  .  .  .  .  .  .  .  67
Remove the front bezel .  .  .  .  .  .  .  .  .  .  68
Install a hot-swap power supply .  .  .  .  .  .  70
Install the 3.5-inch/2.5-inch drive cage .  .  .  .  74
Install the 3.5-inch/2.5-inch hot-swap  
backplane .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  75
Install the 3.5-inch simple-swap drive  
backplate .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  76
Install a front system fan .  .  .  .  .  .  .  .  .  77
Install a memory module .  .  .  .  .  .  .  .  .  79
Install the M.2 drive .  .  .  .  .  .  .  .  .  .  .  82
Install a RAID flash power module .  .  .  .  .  .  83
Install a PCIe adapter .  .  .  .  .  .  .  .  .  .  .  85
Install a 2.5-inch drive into a 3.5-inch drive  
bay .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  88
Install a hot-swap drive .  .  .  .  .  .  .  .  .  .  90
Install a simple-swap drive.  .  .  .  .  .  .  .  .  91
Install an optical drive  .  .  .  .  .  .  .  .  .  .  93
Install a tape drive  .  .  .  .  .  .  .  .  .  .  .  .  96
Install the server cover .  .  .  .  .  .  .  .  .  .  97
Install the server into the rails .  .  .  .  .  .  .  .  .  100
Cable the server .  .  .  .  .  .  .  .  .  .  .  .  .  .  105
Power on the server .  .  .  .  .  .  .  .  .  .  .  .  .  106
Validate server setup.  .  .  .  .  .  .  .  .  .  .  .  .  106
Power off the server .  .  .  .  .  .  .  .  .  .  .  .  .  106
Chapter 4.  System configuration .  .  . 107
Set the network connection for the Lenovo XClarity 
Controller .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  107
Set front USB port for Lenovo XClarity Controller  
connection.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  108
Update the firmware .  .  .  .  .  .  .  .  .  .  .  .  .  109
Configure the firmware .  .  .  .  .  .  .  .  .  .  .  .  112
Memory configuration .  .  .  .  .  .  .  .  .  .  .  .  113
RAID configuration .  .  .  .  .  .  .  .  .  .  .  .  .  113
Deploy the operating system.  .  .  .  .  .  .  .  .  .  114
Back up the server configuration .  .  .  .  .  .  .  .  115
Update the Vital Product Data (VPD).  .  .  .  .  .  .  115
Update the Universal Unique Identifier  
(UUID).  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  115
Update the asset tag .  .  .  .  .  .  .  .  .  .  .  117
Chapter 5.  Resolving installation  
issues .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 119
© Copyright Lenovo 2022 i