Cable From To
1 RAID flash power module
cable
Flash power module connector on the
RAID adapter
RAID Flash power module
2 Intrusion switch cable
Intrusion switch Intrusion switch connector on the
system board
Optical/tape drives
Use this section to understand the cable routing for server models with optical/tape drives.
From To
1
ODD/Tape drive power connectors
ODD/tape drive power connector on the system
board
2
ODD/Tape drive SATA connectors SATA 6, 7
Fixed power supply
Use the section to understand the cable routing for the fixed power supply.
Notes:
• Ensure that all cables are routed through the correct cable clips.
• As the processor power connectors on the power distribution board may look similar in appearance, make
sure that the 2 power supply processor power cable and 3 processor power cable are routed correctly as
illustrated.
Chapter 2. Server components 39
To Next Page
Loading...
