Lenovo ThinkSystem ST250 V2 - Hot-Swap Drives

Hot-swap drives
Use this section to understand the cable routing for server models with hot-swap drives.
See the configuration that is applied to the server.
• Software RAID
–
“Four 3.5-inch drives” on page 47
– “Eight 3.5-inch drives” on page 49
– “Eight 2.5-inch drives” on page 51
• Hardware RAID
–
“Four 3.5-inch drives with one 8i RAID adapter” on page 48
– “Eight 3.5-inch drives with one 8i RAID adapter” on page 50
– “Eight 2.5-inch drives with one 8i RAID adapter” on page 52
– “Sixteen 2.5-inch drives with one 16i RAID adapter” on page 53
– “Sixteen 2.5-inch drives with two 8i RAID adapters” on page 54
– “Four 3.5-inch and eight 2.5-inch drives with one 16i RAID adapter” on page 55
– “Four 3.5-inch and eight 2.5-inch drives with two 8i RAID adapters” on page 56
Four 3.5-inch hot-swap drives
Use this section to understand the cable routing for server models with four 3.5-inch hot-swap drives.
Following are the options available for this configuration:
•
“Software RAID” on page 47
• “One 8i RAID adapter” on page 48
46
ThinkSystem ST250 V2 Setup Guide