Lenovo ThinkSystem ST550 7X09 - Install the Fixed Power Supply

Figure 106. Fixed power supply removal
Step 1. Remove the screws that secure the fixed power supply.
Step 2. Push the fixed power supply toward the front of the server. Then, remove the fixed power supply
out of the chassis.
If you are instructed to return the old fixed power supply, follow all packaging instructions and use any
packaging materials that are provided.
Install the fixed power supply
Use this information to install the fixed power supply.
“Read the
installation
Guidelines” on
page 59
“Power off
the server
for this task”
on page 12
“ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 60
S035
CAUTION:
Never remove the cover on a power supply or any part that has this label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
140
ThinkSystem ST550 Maintenance Manual