Figure 43. Air baffle removal
Attention: For proper cooling and airflow, install the air baffle before you turn on the server.
Operating the server with the air baffle removed might damage server components.
Install the air baffle
Use this information to install the air baffle.
“Read the
installation
Guidelines” on
page 59
“Power off
the server
for this task”
on page 12
Before installing the air baffle, ensure that all cables inside the server have been properly routed so that they
will not interfere with the air baffle.
To install the air baffle, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Acsjj4tU79GzKnWG316BYn
• Youku: http://list.youku.com/albumlist/show/id_50483452
Chapter 3. Hardware replacement procedures 73
To Next Page
Loading...
