Figure 33. Front door removal
Step 1. Open the front door.
Step 2. Lift the front door slightly upward until you can completely remove it.
Install the front door
Use this information to install the front door.
“Read the
installation
Guidelines” on
page 59
Before installing the front door, if the server comes with rubber blocks to cover the holes for installing the
front door, remove the rubber blocks first. Store the rubber blocks in case that you later remove the front
door and need the rubber blocks to cover the holes in the front bezel.
To install the front door, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Acsjj4tU79GzKnWG316BYn
• Youku: http://list.youku.com/albumlist/show/id_50483452
62 ThinkSystem ST550 Maintenance Manual
To Next Page
Loading...
