Lenz Digital plus SET-01/4 User Manual

Information SET-01 69
DIGITAL plus
15.2.2 SET_2: language selection
Currently, the LH100 allows you the choice between German and
English (US) display text.
To configure this setting go to the SET menu:
Press On the display you see Explanation
You reach this display by
pressing 'F' followed by '9'
followed by '1'.
The currently selected setting is
shown: The example shows
English as the current setting
With '+' or '-' you can change the
language in the display text.
'Enter' confirms the change, ‘Esc’
lets you leave the menu without
changing the setting.
You leave the system menu with
‘Esc’, which takes you back to
selecting the settings.
With another ‘Esc’ you return to
controlling locomotives.
15.2.3 SET_3: contrast setting
For better readability, the LH100 has a contrast setting for the
display.
To configure this setting go to the SET menu:
Press On the display you see Explanation
You reach this display by
pressing 'F' followed by '9'
followed by '1'.
By pressing the '3' key, the
currently selected contrast
setting is shown
Using the ‘+’ key you can
increase the value.

Lenz Digital plus SET-01/4 Specifications

General

Brand	Lenz
Model	Digital plus SET-01/4
Category	Control Unit
Language	English