Lenze 8400 - Mounting for Standard Devices from 0.55 Kw

E84AYCER communication manual (PROFINET)
Installation
Mechanical installation
24 L EDS84AYCER EN 2.0 - 11/2010
5.1.2 Mounting for standard devices from 0.55 kW
[5-2] Mounting for standard devices from 0.55 kW
Mounting steps
1. Apply a little pressure on the surface of the top side of the standard device MCI slot
cover to leave an indentation (1).
2. Tilt the cover forwards and remove it from the standard device (2).
3. Loosen the securing screw for the communication module on the standard device (3).
4. Insert the communication module into the MCI slot of the standard device (4).
5. Tighten the securing screw again (5).
E84YCPM002A