E84AYCER communication manual (PROFINET)
Installation
Electrical installation
28 L EDS84AYCER EN 2.0 - 11/2010
5.2.3 PROFINET connection
PROFINET is connected via RJ45 sockets X256 (input) and X257 (output).
[5-8] PROFINET connections X256 (IN) and X257 (OUT)
A standard Ethernet patch cable can be used for the connection to the communication
module.
Specification of the Ethernet cable
( 30)
The installation and removal of the Ethernet cables is optimised for the use of connectors
in accordance with the "Automation Initiative of German Domestic Automobile
Manufacturers" (AIDA).
E84YCER001E
Note!
To prevent the RJ45 socket from being damaged, hold the Ethernet cable
connector vertically when inserting it into or removing it from the socket.
To Next Page
Loading...
