E84AYCER communication manual (PROFINET)
About this documentation
Terminology used
10 L EDS84AYCER EN 2.0 - 11/2010
1.3 Terminology used
Term Meaning
Controller Lenze frequency inverter of the "Inverter Drives 8400" product series which the
communication module can be used with.
Application as directed
( 14)
Standard device
»Engineer« Lenze software which supports you throughout the whole machine life cycle -
from planning to maintenance.
Code "Container" for one or several parameters used to parameterise or monitor the
device.
Subcode If a code contains several parameters they are stored in so-called "subcodes".
This manual uses a slash "/" as a separator between code and subcode
(e.g. "C00118/3").
HW Hardware
SW Software
I/O controller PROFINET master
The I/O controller takes over the master function for data communication of the
decentralised field devices. The I/O controller usually is the communication
interface of a PLC.
I/O device PROFINET slave
IO supervisor Engineering and diagnostics tools
The IO supervisor can access process data, diagnostic data, and alarm data.
To Next Page
Loading...
