EDS84AYCER EN 2.0 - 11/2010 L 13
E84AYCER communication manual (PROFINET)
Safety instructions
Device- and application-specific safety instructions
2.2 Device- and application-specific safety instructions
During operation, the communication module must be securely connected to the
standard device.
Use a safely separated power supply unit in accordance with EN 61800-5-1 ("SELV"/
"PELV").
Only use cables that meet the listed specifications.
Specification of the Ethernet cable
( 30)
2.3 Residual hazards
Protection of persons
If the Inverter Drives 8400 are used on a phase earthed mains with a rated mains
voltage ≥ 400 V, external measures need to be implemented in order to provide reliable
protection against accidental contact.
Protective insulation
( 17)
Device protection
The communication module contains electronic components that can be damaged or
destroyed by electrostatic discharge.
Installation
( 22)
Documentation for the standard device, control system, plant/machine
All the other measures prescribed in this documentation must also be
implemented. Observe the safety instructions and application notes contained
in this manual.
To Next Page
Loading...
